Guides · 3 min read
New-build snagging checklist: 20 defects buyers miss
Twenty common new-build defects that buyers often miss, with how to check each one. A practical room-by-room starting point.
Most buyers spot the obvious things: a chipped worktop, a scuffed wall. These are the defects that get missed, because you need to test something, look from an angle or know where to look. Take your phone and a torch.
Doors and windows
- 1. Doors that don't latch: close every internal door gently. It should click shut without a push and not swing open on its own.
- 2. Uneven door gaps: look at the gap round each door. It should be even, and the door shouldn't rub on the frame or floor.
- 3. Windows that don't lock or seal: open, close and lock every window. Check the rubber seals are continuous and the handles feel firm.
- 4. Scratched or misted glass: shine a torch across the glass at an angle. Misting between panes means a failed sealed unit.
- 5. Missing trickle vents or stuck vents: check they open and close.
Walls, ceilings and floors
- 6. Poor finish only visible in raking light: hold a torch flat against the wall. Bumps, dents and patchy paint jump out.
- 7. Gaps between skirting and floor or wall: common, and easy to fix early.
- 8. Squeaky or springy floors: walk every floor slowly, especially landings and in front of doors.
- 9. Cracked or hollow tiles: tap tiles gently with a coin. A hollow sound can mean poor adhesive.
Kitchen and bathrooms
- 10. Sealant gaps round baths, showers and worktops: look closely at corners and joints.
- 11. Slow drains: fill every basin and the bath, then let it drain. Watch for gurgling or slow draining.
- 12. Leaks under sinks: run the taps for a minute, then check under the sink with a torch and a dry tissue.
- 13. Extractor fans that don't pull air: hold a sheet of toilet paper near the fan. It should be drawn towards it.
- 14. Kitchen units out of line: look along doors and drawers. They should be level with even gaps.
Heating, electrics and services
- 15. Radiators that stay cold at the top or don't heat at all: put the heating on and touch every radiator after 20 minutes.
- 16. Dead sockets: take a phone charger and test every socket, including outdoor ones.
- 17. Missing labels: the consumer unit (fuse box) should be clearly labelled.
Outside
- 18. Mortar gaps and damaged bricks: walk round the outside and look at the brickwork near ground level and round windows.
- 19. Patios and paths that slope towards the house: rain should run away from your walls.
- 20. Blocked or missing gutters and downpipes: check they're connected and clear.
How to record what you find
For each snag, write down the room, what's wrong and where exactly, and take a clear photo with something for scale. Then put it all into one report for your developer. See how to get your developer to fix snags fast.